View 32PW9308_599335.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
Contents
Installation
Help? If this instruction manual does not give an answer or if `Tips' do not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet. Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline. Model: 28/32/36PW9308 Product No: AG .....................................
Preparation ........................................................................................ 2 Keys on top of the TV .................................................................... 2 Your remote control ................................................................... 3-4 To use the menus.............................................................................. 5 Select the menu language and country ....................................... 5 Store TV channels ............................................................................ 6 Automatic installation ..............................................................6 Manual installation .................................................................... 6 Give name .................................................................................. 6 Reshuffle the programme list .................................................. 7 Select favourite TV channels .................................................. 7 TV setup ............................................................................................. 7 General ....................................................................................... 7 Source .......................................................................................... 8 Decoder ...................................................................................... 8 Demo .................................................................................................. 8
Operation
TV menu Picture menu .............................................................................. 9 Sound menu ............................................................................. 10 Features menu................................................................... 10-11 Teletext guide ........................................................................... 11-12 Teletext ...................................................................................... 12-13
R End of life directives
Philips is paying a lot of attention to producing environmentally-friendly in green focal areas.Your new TV contains materials which can be recycled and reused. At the end of its life specialised companies can dismantle the discarded TV to concentrate the reusable materials and to minimise the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations.
Connect peripheral equipment
Connecting and selecting equipment ..................................14-15 Audio- and video equipment keys ............................................. 16 Tips .................................................................................................. 17
EasyLink features are based on the "one touch operation" approach. This means that a sequence of actions are executed at the same time in both the television and the video cassette recorder, provided both are fitted with the EasyLink function and connected with the eurocable supplied with your video recorder.
1
English
www..com
Preparation
& Place the TV on a solid surface.
` Remote control: Insert the 2 batteries supplied
! 28PW9308: 41 kg; 32PW9308: 59 kg; 36PW9308: 79 kg !
(Type R6-1,5V).
min. 1m
For ventilation, leave at least 5 cm free all around the TV. Do not place the TV on a carpet.To prevent any unsafe situations, do not place any objects on top of the TV. Avoid heat, direct sunlight and exposure to rain or water. e Insert the aerial plug firmly into the aerial socket x at the back of the TV. For best picture quality use the suppressor-aerial cable supplied. " Insert the mains plug of the TV in the wall socket having a mains voltage of 220V-240V.
The batteries supplied do not contain the heavy metals mercury and cadmium. Please check on how to dispose of exhausted batteries according to local regulations. ( Switch the TV on : Press the power switch A on the front of your TV. A green indicator on the front of the TV lights up and the screen comes on. If the TV is in standby mode, press the -P+ keys or the red B key on the remote control.
Keys on top of the TV
Should your remote be lost or broken you can still change some of the basic settings with the keys on top of your TV. Press: * the V - or + key to adjust the volume; * the -P+ keys to select the TV channels or sources.
VOLUME
-
V
+ MENU
-
PROGRAM
P
+
MENU/OK
The MENU key can be used to summon the main menu without the remote control. Use: * the V - and + keys and the P- and P+ keys to select menu items in the directions as shown; * the MENU key to confirm your selection. Note: When activated via the MENU key on top of the TV, only Exit lets you dismiss the menu. Navigate to Exit and press the MENU key.
Picture Sound Features
TV
Setup Demo Install Exit
2
www..com
Use of the remote control
Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it. When a key enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after 4 seconds or press OK to remove immediately.
v Select peripherals (p. 15)
VCR DVD AMP SAT
v
B Standby
B
DVD AMP SAT
Audio- and Video equipment keys (p. 16)
Press to switch the TV on or off. When switched off, a red indicator lights up.
VCR
U
(R) O
Q
I
PIXEL PLUS
(R)O
Audio- and Video equipment keys (p. 16)
QSurround mode Incredible surround
With stereo transmission, and when Incredible surround is selected, it seems as though the loudspeakers are spread further apart from one another.
ae
b
MENU
(R) Record
See Record with your recorder with EasyLink, p. 16
OK
I
Virtual Dolby surround
V P P
U Time display
The time is displayed on the screen.
1 4 7
i
2 5 8 0
h q
3 6 9
0
ae Teletext guide on/off p. 11
OK Press this key
Optimal with Dolby surround signals. Enables you to experience the effect of Dolby surround Pro Logic, reproducing a rear sound effect. See Sound menu, 3D effect, p. 10.
* to activate your choice, when in the menus. * to display the programme list.
Note:You can make the same selection in the Sound menu, surround mode, p. 10. ICinema Go
See separate Cinema Link booklet supplied.
V To adjust the volume. Interrupt the sound or restore it. i On Screen information
Press to display information about the selected TV channel and programme.
b
S
x Pixel Plus demo on/off
In the right part Pixel Plus and Digital Natural Motion are switched on.
b Teletext on/off p. 12 I Main menu see p. 5 P Programme selection
To browse through the TV channels and sources stored in the favourite list.
Menu/Remote control info
When a menu is on screen, press i to display info on the selected menu item. For information on the remote control functions, while the menu info is displayed, press any key on the remote control. The normal function of the key is not executed.
0/9 Digit keys
To select a TV channel. For a two digit programme number, enter the second digit within 2 seconds.To switch immediately to a selected one digit TV channel, keep the digit key pressed a bit longer.
3
www..com
0 Smart surf
v
B
DVD AMP SAT
With this key you can easily switch between 2 up to 9 different TV channels or sources. Press the OK key or wait for the time out to dismiss the Smart surf display.
VCR
U
(R) O
Q
I
PIXEL PLUS
b Dual screen & Press the b or ae key. Press the b key to show Teletext or Teletext Guide on the right of the
screen.
e * Picture/Teletext Guide:
ae
b
MENU
OK
I
- Press the cursor left/right to select a TV channel. - Press the cursor down to move the puck to the blue ball in the left screen. - Press +P- to select another TV channel. * Picture/Teletext: See Active screen selection, p. 12.
" Press the b key to switch off dual screen.
V
P P
h Active control see p. 9
1 4 7
i
2 5 8 0
h q
3 6 9
0
qPicture format
Press this key repeatedly or press the cursor up/down to select another picture format: Auto format, Super zoom, 4:3, Movie Expand 14:9, Movie Expand 16:9, Subtitle zoom or Wide screen.
b
S
Auto format
Super zoom
4:3
Movie Expand 14:9
Movie Expand 16:9
Subtitle zoom
Wide screen
Auto format makes the picture fill the screen as much as possible. In case of subtitles in the bottom black bar, Auto format makes the subtitles visible. If subtitles are only partly visible, press cursor up. In case of a broadcaster logo in the corner of the top black bar, the logo disappears from the screen. Super zoom removes the black bars on the sides of 4:3 programs with minimal distortion. When in Movie Expand 14:9, 16:9, Super zoom or Subtitle zoom picture format, you can make subtitles visible with the cursor up/down.
S Freeze
To freeze the picture.
4
www..com
To use the menus
& Press the MENU I key on the remote control to summon
v
B
DVD AMP SAT
the main menu. At any moment you can exit the menu by pressing the MENU I key again. Note: If you have connected equipment with Cinema Link, more menu items are present.
Picture Sound Features
VCR
U
(R) O
Q
I
PIXEL PLUS
TV
cursor to select adjustments return or switch main menu on/off
OK key to activate Setup Demo Install e Use the cursor in the up/down direction to select the TV,
ae
b
MENU
OK
I
V
P P
Setup, Demo or Install menu.
Use the cursor left/right to select Picture, Sound or
Features.
1
2
3
Press the i key to get information about the selected menu item.
Note: Sometimes not all the menu items are visible on the screen (indicated by a cluster of blue balls). Use the cursor down or right to reveal all items. " Use the cursor in the left/right direction to select the menu item. ` Use the cursor up/down again to select the control you want to select or to adjust. Note: Items temporary not available or not relevant are displayed in a light grey colour and cannot be selected.
Installation
The installation menu contains the following items:
Language
Install
Country
Automatic install
Manual install
Give name Reshuffle Favourite programmes
EasyLink If your video recorder has an EasyLink function, during installation, the language, country and available channels are automatically transmitted to the video recorder.
Select the menu language and country
Language Install English Deutsch Francais
Country Install Austria Belgium Croatia
& Press the MENU I key on the remote control. e Use the cursor down to select Install. " Use the cursor right to select Language. Follow the instructions on screen. ` Use the cursor up/down to select your preferred language and press the OK key to confirm your selection. ( Use the cursor right to select Country. Select the country where you are now located and press the OK key. Select Other when none of the countries applies. e Proceed with the Install menu.
5
www..com
Store TV channels
After language and country are set correctly, you can now search for and store the TV channels in two different ways: using Automatic Installation or Manual Installation (tuning-in channel by channel). Select your choice with the cursor right.
Automatic installation
Automatic install Install Install Start
` The message Searching appears and the
progress of autoprogramming is displayed. If a cable system or a TV channel which broadcasts ACI (Automatic Channel Installation) is detected, a programme list appears.Without ACI broadcast, the channels are numbered according your language and country selection.You can use Reshuffle to renumber them. See p. 7. It is possible that the cable company or the TV channel displays a broadcast selection menu. Layout and items are defined by the cable company or the TV channel. Make your choice with the cursor and press the OK key.
& Select Automatic install in the Install menu.
Note: All channels must be unlocked in order to autoprogram. If requested, enter your code to unlock all channels. (See TV, Features menu, Childlock, p. 10.) e Press the cursor down. The autoprogramming option label Start appears. " Press the cursor right.
Manual installation
Manual install Install Selection mode System Programme Search Fine tune Store
Searching for and storing TV channels is done channel by channel. You must go through every step of the Manual Installation menu. & Select Manual install in the Install menu. e Press the cursor down. Follow the instructions on screen. Note: Search or direct selection of a TV channel. If you know the frequency, the C- or S-channel number, enter the 3 or 2 digits of the frequency or the channel number directly with the digit keys 0 to 9 (e.g. 048). Press the cursor down to proceed. Repeat to search for another TV channel.
Give name
Give name Install VCR1 BBC1 BBC2 CNN TVE .....
(R) Space
p
& Select Give Name in the Install menu and
press the cursor down.
(R) Delete 123 456 789 0 (R) Special
e Select the programme number.
ABCDEFG HIJKLMN OPQRSTU VWXYZ (R) Shift
It is possible to change the name stored in the memory or to assign a name to a TV channel for which a name has not yet been entered. A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99.
Note: keep the cursor up/down pressed to scroll through the programme list quickly. " Press the cursor right. A keyboard appears on the screen. Press the cursor right to enter the keyboard. Press the cursor up/down, left/right to select the first character and press OK. Repeat for every character you want to enter. Select Space to enter a space; Delete to erase the highlighted character in the name entered; Shift to display upper- or lowercase characters on the keyboard; Special to display special characters on the keyboard. Press OK to confirm. ` Press the cursor left repeatedly when you have finished the name giving. ( Select another programme number and repeat steps " to `.
6
www..com
Reshuffle the programme list
You can change the order of the stored TV channels. & Select Reshuffle in the Installation menu. e Follow the instructions on screen.
Select Favourite TV channels
& Select Favourite programmes in the Install
menu.
e Select your programme number with the cursor
up/down.
" Select Yes or No with the cursor right. ` Repeat e and " for every TV channel or
external you want to make a favourite or a nonfavourite TV channel or external.
TV Setup
General Source Decoder Setup Menu background Smart surf Factory settings Tilt adjust OSD Programme title Teletext level 2.5 Auto surround Set/Change code
The Setup menu contains items that control the settings of the TV's functions, features, services and peripherals you may have connected. The General menu allows you to change various settings that are presumably adjusted less frequently than most other settings. The Source menu allows you to select a source. The Decoder menu allows you to define one or more programme numbers as decoder programme numbers. Press the i key on the remote control to get information about the selected menu item.
General
Smart surf & Select Smart surf. e With the cursor left/right, select * 2 programmes if you want the 0 key to toggle between the current and the previously selected channel, * 9 programmes if you want the 0 key to summon a list of up to 9 channels which can be selected, To add/remove a channel or source: Tune to the channel or source you wish to add or remove. Press the 0 key and press the cursor right to add or remove. Note: If there are already 9 channels/sources in the list, the one at the bottom of the list will be removed. Factory settings This resets the picture and sound settings to their predefined factory values, but maintains the channel installation settings. OSD (On Screen Display) See Use of the remote control, p. 3, i On screen information. & Select OSD. e Select Normal to activate the continuous display of the programme number. Also TV channel and programme information are extended. Minimum will display reduced channel information. Note: When subtitles is switched on, see Features, p.10, continuous display of the programme number is not possible. Teletext level 2.5 Some broadcasters offer the opportunity to see more colours, other background colours and nicer pictures in the teletext pages. & Select Teletext level 2.5. e Press the cursor right to select Teletext level 2.5 On to take advantage of this feature. " Press the cursor right again to select Teletext level 2.5 Off if you like the more neutral teletext layout. The selection made is valid for all channels which broadcast teletext level 2.5. Note: It may take a few seconds before teletext broadcast switches over to Teletext level 2.5. 7
www..com
Set/Change code The Child lock feature (see TV, Features, p. 10) allows you to lock channels to prevent others from watching certain programmes.To watch locked channels, a 4-digit code must be entered. The Set/Change code menu item allows you to create or change a Personal Identification Number (PIN). & Select Set/Change code. e If no code exists yet, the menu item is set to Set code. If a code has previously been entered, the menu item is set to Change code. Follow the instructions on screen. Important:You have forgotten your code ! & Select Change code in the General menu and press OK. e Press the cursor right and enter the overriding code 8-8-8-8. " Press the cursor again and enter a new personal 4-digit code.The previous code is erased and the new code is stored. Auto Surround Sometimes the broadcaster transmits special signals for Surround Sound encoded programmes. The TV automatically switches to the best surround sound mode when Auto Surround is switched On.
& Press the cursor right to enter the list of types Source Setup EXT1 EXT2 SIDE
Source
of peripherals attached to the selected input.
e Select the peripheral device with the cursor
up/down. Once you have selected the source type, e.g. DVD, this source will automatically be selected when your remote control is in DVD mode, see p. 3, and when you press the v key on the remote control.
This menu allows you to indicate the peripheral you connected to one of the external inputs.
Decoder
Decoder Setup Programme Status
" Select the programme number under which you
If a decoder or a descrambler is connected, see p. 14, you can define one or more programme numbers as decoder programme numbers. & Select Decoder with the cursor right. e Select Programme.
have stored the programme coming from your decoder. ` Select Status. * Select the input used to connect your decoder: None, EXT1 or EXT2. * Select None if you do not want the selected programme number being activated as a decoder programme number. Note: Select EXT2 when the decoder is connected to your EasyLink video recorder. The Demo menu allows to demonstrate the TV features separately or in a continuous loop.
Demo
TV Setup Demo Install Auto demo ......
Dealer demo - Digital options - Light sensor - Comb filter
If Auto demo has been selected the demo will automatically present the features sequentially in a loop. Press one of the cursor keys to stop the Auto demo. If one of the features has been selected, this particular feature demo will run only once, and the Demo menu will reappear. Note: The Dealer demo is not part of the automatic sequence and can only be activated separately.
8
www..com
TV menu
Press the MENU I key on the remote control to summon the main menu. Press the i key on the remote control to get information about the selected menu item.
Picture menu
TV
Smart picture Contrast Brightness Colour Sharpness Tint Digital options Dynamic contrast DNR Colour enhancement (Hue) Picture format
& Press the cursor right to select Picture.
Picture Sound Features e Select the menu items in the Picture menu with the cursor
up/down.
" Adjust the settings with the cursor left/right or enter the list of
submenu items with the cursor right. Select a submenu item with the cursor up/down. Note: To remove the menu background before adjusting the picture settings, see Select TV setup, General, p. 7. Smart picture Select Smart picture to display a list of predefined picture settings, each corresponding with specific factory settings. Personal refers to the personal preference settings of picture in the picture menu. Digital options Pixel Plus is the most ideal setting, doubles the horizontal resolution and increases the number of lines with 33%.You may consider to select Movie Plus in case a halo effect should disturb you. Dependent on your own preference, select Double lines, or 100 Hz Digital Scan. Note: When 60 Hz NTSC material is used, the options are changed to Pixel Plus, Movie Plus or Progressive, progressive scan without motion compensation. Active Control The TV continuously measures and corrects all incoming signals in order to provide the best picture possible.
& Press the h key on the remote control. e The Active Control menu appears. " Press the cursor up/down to select the Active Control values
Off, Minimum, Medium (recommended) or Maximum.
` ( e
!
The picture settings are being optimised continuously and automatically which is displayed by bars.The menu items can not be selected. Press the cursor right to select Smart Picture. Press the cursor up/down to select one of the predefined picture settings. Press the cursor right to select Active Display. Press the cursor up/down to select Show bars, one of the Dual screen demos or Off. When you select Dynamic contrast, Pixel Plus, Digital Noise Reduction or Digital Natural Motion, the TV screen is divided into two parts: in the left part the selected picture quality setting is switched off; in the right part it is switched on. Press the h key again to switch off the Active Control menu.
9
www..com
Sound menu
TV
& Press the cursor right to select Sound. e Select the menu items in the Sound menu with the cursor
Sound Smart sound Equalizer Volume Balance Loudness Headphone volume Surround mode (Dual I-II) (Mono/Stereo) (Nicam/Analogue) (3D effect) AVL Delta volume
up/down and adjust the settings with the cursor left/right.Remember, control settings are at normal mid-range levels when the bar scale is centred. Smart sound Select Smart sound to display a list of predefined sound settings, each corresponding with specific factory settings of Treble and Bass. Personal refers to the personal preference settings of sound in the sound menu. Notes: - Some menu items are only available in case of a Cinema Link configuration and when the Cinema Link is activated. Others are steered by the audio receiver instead of by the TV. See the separate Cinema Link booklet supplied. - Dual X is only available with dual sound transmission. - Mono/Stereo is only selectable in case of analogue stereo transmission. - Nicam/Analogue is only selectable in case of Nicam transmission.
Features menu
Features TV Off Programme list On Subtitle Sleeptimer On during mute Child lock On timer Zoom & Press the cursor right to select Features. e Select the menu items with the cursor up/down and adjust the
settings with the cursor left/right. Programme list Press the OK key to switch over to the selected TV channel or external.
Important:You have forgotten your code ! See p. 8.
" Select one of the menu items of the child lock
Select subtitles The subtitle page must be stored for each TV channel: Switch on teletext and select the proper subtitle page from the index. Switch off teletext. Subtitle On will automatically display them on the selected TV channels if subtitles are in the transmission. A symbol will indicate that the mode is on. Select On during mute when you want to have the subtitles automatically displayed only when the sound has been muted with the key on the remote control. Child lock
& Select Child lock. Lock Custom lock Child lock Unlock Lock after Programme lock
menu: * Lock if you want to lock all channels and externals. * Custom lock and press the cursor right. Select: - Lock after if you want to lock all channels and externals from a certain time onwards. Press the cursor right and enter the time with the cursor up/down and right. Press the OK key to validate. - Programme lock if you want to lock a certain TV channel or external; * Select Unlock to disable all locks you have set.
e Press the cursor right to enter the Child lock
menu.You're summoned to enter your code. Note:You have to re-enter your code each time you enter the child lock menu.
10
www..com
On timer & Select On timer with the cursor down.
Off On VCR1 BBC2 CNN TVE ..... Sunday Monday ....... Daily
Press the cursor right once again to enter the
time with the digit keys or with the cursor up/down and press the OK key to activate. e Press the MENU I key to turn off the menu. Note: To check your timer settings, press the i key.
15:45
On timer
e Select On with the cursor right. " Press the cursor right again to enter the
programme list.
` Select the TV channel or external you want
your TV to switch to on a selected time and day. ( Press the cursor right again to select a day of the week or to select Daily.
Zoom & Select Zoom with the cursor down and press the OK key. e Press the OK key to select one of the zoom magnifications (x1, x4, x9, x16). " Additionally you can shift the selected zoom window over the screen with the cursor keys up/down, left/right. ` Press the MENU I key to turn off the zoom function.
Teletext guide
TV channels which broadcast teletext also transmit a page with the programme guide of the day. If the displayed teletext programme guide page satisfies the Video Programming via Teletext (VPT) requirements, it will be possible to record, remind, watch or lock programmes.
& Press the ae key. e Select a TV channel with the cursor up/down and press OK. " Move the cursor up to the top of the channel list where the name of the selected TV channel
reappears. ` Press the cursor right to move the puck over the selection ball. ( In the teletext index page, look for the programme guide page of the day or the following day. Enter with the digit keys, the programme guide page number. Press the cursor right twice to move the puck to the right to choose one of the subpages if available.
page ball selection ball
Mon 05 Feb 16.35 1
subpages
BBC1
100
scroll ball
BBC2 ITV CH4 CH5
BBC
CEEFAX
430 300 305 400 415 500 Lock
channel list
Review
LIONS RECORD ANOTHER WIN Index 100 News BBC Info 110 Headlines Children 120 Weather Cookery 150 Sports Education 200 Radio Record Remind Watch
If the selected programme satisfies the VPT requirements, the TV will remember the last selected teletext page number of that channel that contains programme guide information and indicates which programme starts at what time. Every time you press the ae key, the teletext programme guide page of the selected TV channel will be available. Note: The broadcaster is responsible for the content of the information.
11
www..com
Basic functions
Press one of the grey, red, green, yellow or blue keys to activate a Teletext Guide function. The keys appear in grey if the function is not available. Review: this menu provides a list of programmes that are marked as reminders, those that have to be recorded and those that are locked.This menu can be used to change or remove marked programmes. Record: to programme the recording of the video recorder (if it has a NEXTVIEWLink function and is connected to EXT. 2). Remind: to automatically switch on the TV if it is in standby or to display a message if the TV is on. Lock: to lock certain programmes to prevent recording or watching. For the functions Record, Remind or Lock, a small menu pops up in which you can choose the interval: once, daily or weekly, or clear an earlier made record, remind or lock setting.The default interval is set to Once.To confirm the frequency, press the OK key. Watch: to watch the selected and currently broadcast programme.
Teletext
Most TV channels broadcast information via teletext.This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time. After each programme change, the memory is refreshed.
Switch Teletext on and off
Press b to switch the teletext on.
102 03 04 05 06 07 08 09 10 11 12 BBC CEEFAX 102 Mon 05 Feb 16.35.22
Select the index teletext page
Press the grey colour key to display the main index (usually p.100).
BBC
CEEFAX
300 305 400 415 500 550 888 600
LIONS RECORD ANOTHER WIN 430 Index 100 News BBC Info 110 Headlines Children 120 Weather Cookery 150 Sports Education 200 Radio Lottery 230 Travel Finance 240 Subtitling Music 280 TV Listings
Only for T.O.P teletext broadcasts: Press i. A T.O.P. overview of the teletext subjects available is displayed. Select with the cursor up/down, left/right the desired subject and press the OK key. Not all TV channels broadcast T.O.P. teletext.
Red
Green
Yellow
Blue
Select subpages
When a selected teletext page consists of different subpages, a list of available subpages appears on the screen. Press the cursor left or right to select the next or previous subpage.
Select a Teletext page
- Enter the desired page number with the digit keys, the cursor keys up/down or with the -P+ key. - Select the options at the bottom of the screen with the colour keys.
Enlarge a Teletext page
Press q repeatedly to display the upper teletext part, the lower teletext part and then to return to the normal teletext page size. When the teletext page is enlarged, you can scroll the text, line by line using the cursor up/down.
Previously selected teletext page
(Only possible in case there is no list of favourite teletext pages available. See p. 13.) Press the 0 key.
Active screen selection
When in dual screen picture/teletext, enter the desired page number with the -P+ key, then press the MENU key, then select the left screen (with the blue ball at the top). You can now select a compressed or full screen view of picture/teletext with the q key. 12
www..com
Hypertext
With hypertext you can quickly jump to a pagenumber or search for a specific word shown on the current teletext page. & Press the OK key to highlight the first word or a number on the page. e Use the cursor up/down, left/right to select any other word or number you want to search for.
" Press the OK key to confirm.The search starts.
A message appears at the bottom of the screen to indicate the searching, or that the word or page is not found. ` Use the cursor up to exit hypertext.
Teletext menu
(only available in full screen teletext mode) & Press the MENU I key to activate the menu. e Press the cursor up/down to select the menu items. " Press the cursor right to activate. Reveal Reveals/conceals hidden information on a page, such as solutions to riddles and puzzles. Press the cursor right to activate. Favourite This list contains up to eight favourite teletext pages. Only the pages of the current channel can be selected. & Press the cursor right to enter the list. e Press the cursor right again to add the current page or to select one of the favourite pages to the list. " Press the MENU I key to watch the page. ` Use the 0 key to browse through the list of favourite pages. Search Selecting a word On the keyboard on screen you can type in a random word you want to search for in the teletext pages.Whether upper- or lowercase is used has no influence.
102 puck 03 04 05 06 07 08 09 10 11 12
Cancel Accept WORD NAME FOOTBALL
` Select Cancel to cancel the word; Space to
enter a space; Delete to delete the last character selected; Shift to switch between lowercase or capital characters; Special to display special characters on the keyboard and press the OK key. ( Press the cursor left repeatedly to return to the Teletext menu again. Searching a word
& Type in the word on screen or select a word from the history list on the right and press OK. e Select Accept and press OK again.The message
Searching appears.
" To cancel the searching or to search for a new word, select Keyboard and press OK. ` When a word is not found, a message appears.
When the word is found, it is highlighted in the teletext page.To continue the search, press the ok key. Cycle subpages (if available) Makes the subpages cycle automatically. Press the cursor right to activate and to deactivate again. Timed page To display a specific page from a selected TV channel at a certain time. & Press the cursor right and select Yes or No. e Enter the time and pagenumber with the cursor keys or the digit keys. Note: Teletext does not have to remain switched on, but you should watch the TV channel you have selected the specific page from. " Press the cursor left to return to the TV menu again. Language If the displayed characters on screen do not correspond with the characters used by the teletext broadcaster, you can change the language group here. Select Group 1 or 2 with the cursor right. Press the MENU I key to leave the Teletext menu. 13
Space T Delete T E X T ELE A B C D E F G 1 2 BBC1 3 HIJKLMN OPQRSTU VWXYZ Shift 456 789 0 Special
Red
Green
Yellow
Blue
& Press the cursor right to enter the keyboard. e Press the cursor left/right, up/down to select
the characters, words or functions.
" Press the OK key to confirm each character
selected.
www..com
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you how to connect them. Note: EXT. 1 can handle CVBS and RGB, EXT. 2 CVBS and Y/C. It is preferred to connect peripherals with RGB output to EXT. 1 as RGB provides a better picture quality. If your recorder is provided with the Easylink function, it should be connected to EXT. 2 to benefit from the EasyLink functionality.
Recorder
(VCR-DVD+RW)
CABLE
2
EXT.
1 2
Connect the aerial cables 1, 2 and, to obtain the optimum picture quality, eurocable 3 as shown. If your recorder does not have a euroconnector, the only possible connection is via the aerial cable.You will therefore need to tune in your recorder's test signal and assign it programme number 0 or store the test signal under a programme number between 90 and 99, see Manual installation, p. 6. See the handbook of your recorder. Decoder and Recorder Connect a eurocable 4 to your decoder and to the special euroconnector of your recorder. See also the recorder handbook. See Decoder, p. 8. You can also connect your decoder directly to EXT. 1 or 2 with a eurocable.
3
4
Other equipment (satellite receiver, decoder, DVD, games, etc.)
& Connect the aerial cables 1, 2 and 3 as shown (only if
CABLE
1
1 EXT. 2
4 2
your peripheral has TV aerial in-/output). Connect your equipment with a eurocable 4 or 5 to one of the euroconnectors EXT.1 or 2 to obtain a better picture quality. e Look for the test signal of your peripheral in the same way as you do for a recorder. " Make a selection in the Setup, Source menu, p. 8.
3
5
Side connections
Camera or Camcorder
& Connect your camera or camcorder as shown. e Connect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect AUDIO R 3.
2
3
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-video input 1 and audio inputs 3. Do not connect cable 1 and 2 at the same time. This may cause picture distortion ! Headphone
1
& Insert the plug into the headphone socket L as shown. e Press on the remote control to switch off the internal
loudspeakers of the TV. The headphone impedance must be between 8 and 4000 Ohm. The headphone socket has a 3.5 mm jack. In the Sound menu select Headphone volume to adjust the headphone volume. 14
www..com
Stereo amplifier and two extra
FRONT
speakers
& Connect the audio cables to the audio input of your amplifier and to AUDIO L and R at the
back of your TV.
e The output level is controlled by the volume
control of the amplifier.
AUDIO
Note: Switch off the TV and your audio amplifier before connecting them. Set the audio amplifier's volume to minimum.
To select connected equipment
Press the v key on the remote control repeatedly to select EXT1, EXT2 or SIDE according to where you connected your equipment at the back or the right side of your TV. Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Cinema Link surround receiver
See the separate supplied Cinema Link instruction manual. Attention: the sound info on screen will not correspond with the actual sound reproduction.
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can be operated with the remote control via the Recorder or DVD menu on screen.
Recorder O p Rwd Play DVD Op Prev. Play Stop Play I Next Eject Stop Play Ffw (R) I Rec Eject & Press the MENU I key on the remote
control.
e Select the Recorder or DVD menu with the
cursor up/down.
" Press the cursor left/right, up/down to select
one of the recorder or DVD functions. The key (R) for recording can be operated in the TV mode. If your EasyLink recorder has the system standby function, when you press the B key for 3 seconds, both TV and the recorder are switched to standby.
15
www..com
Audio- and video equipment keys
Most of the audio and video equipment from our range of products can be operated with the remote control of your TV.
v
B
DVD AMP SAT
VCR
Press one of the keys after you pressed the VCR, DVD, AMP or SAT key repeatedly according to the equipment you want to operate with this remote control. See Use of the remote control, p. 3. B S (R) O to switch to standby for pause (DVD, CD,VCR) for record for rewind (VCR, CD); search down (DVD, AMP) for stop for play for fast forward (VCR,
CD);
U
(R) O
Q
I
PIXEL PLUS
I
-P+
ae
b
MENU
OK
I
0 to 9 0
V
P P
1 4 7
i
2 5 8 0
h q
3 6 9
0
ae
b
b S
i
search up (DVD/AMP) to select your choice of subtitle language (DVD); RDS news/TA (AMP); to shuffle play (CD) to select a DVD title; RDS display (AMP); info on screen (CD) display information
U Q
to switch the menu on or off for chapter, channel, track selection digit entry tape index (VCR), select a DVD chapter, select a frequency (AMP) VCR timer surround on/off (AMP,
CD)
cursor up/down to select the next or the previous disc (CD) cursor left/right to select the previous or following track (CD); to search up/down (AMP)
Note: When no action is undertaken within 60 seconds, the remote control returns to TV mode. Submodes The SAT mode can be customised according to the satellite receiver you want to operate: with RC6 or RC5 signalling standard. Within TV mode, press the OK key together with: digit key 3 to select the SAT RC-5 system digit key 4 to select the SAT RC-6 system.
Record with your recorder with EasyLink
In TV mode, it is possible to start a direct recording of the programme which is being displayed on the TV screen. Continue to press the (R) record key on the remote control for more than 2 seconds. Note: Switching programme numbers on your TV does not disturb recording ! When recording a programme from a peripheral connected to EXT. 1, you can not select another TV programme on the screen.
16
www..com
Tips
Care of the screen Clean the TV with a slightly damp soft cloth. Do not use abrasive solvent as it can
damage the TV screen.
Poor Picture
* Have you selected the correct TV system in the manual installation menu ? * Is your TV or house aerial located too close to loudspeakers, non-earthed audio equipment or neon lights, etc.? * Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. * Is the picture or teletext unrecognisable? Check if you have entered the correct frequency. See Installation, p. 6. * Are brightness, sharpness and contrast out of adjustment? Select Factory settings in the Setup, General menu, p. 7. * Sometimes poor picture quality is possible when having activated an S-VHS camera or camcorder connected to the right side of your TV and another peripheral is connected to EXT 1 or 2 at the same time. In this case switch off one of the other peripherals. * Is the aerial connected properly? * Are the plugs tightly connected in the aerial socket? * Is the aerial cable in good condition and does it have suitable plugs? * No sound on any channel? Check the volume isn't at minimum. * Is the sound interrupted with the mute key ?
No picture
No sound
No solution found Switch your TV off and then on again once. Never attempt to repair a defective for your picture or TV yourself. Check with your dealer or call a TV technician. sound problem ? Remote control
* If your TV no longer responds to the remote control, the batteries may be dead or the wrong mode (TV or other peripheral, see p. 3) is selected. * You can still use the MENU key and the -/+ keys at the top of your TV. Have you selected the wrong menu? Press the MENU I key again to exit from the menu. Your TV consumes energy in the standby mode. Energy consumption contributes to air and water pollution. Power consumption: 1 W.
Menu Standby
17
www..com

▲Up To Search▲

Price & Availability of 32PW9308

	To Download 32PW9308 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .